Removing Staples After Gluing

Using staples is a great way of clamping parts together while the glue is drying.   This video is an excellent review of the technique and how to get the staples out after the glue dries

http://link.brightcove.com/services/player/bcpid1431564069?bclid=1432790108&bctid=1644024668

Bending Wood Capstrips

This video provides a very useful method for pre-bending wood parts that would otherwise break during assembly. The upper rib caps should be bent this way to relieve stress in the ribs.   Fortunately T-88 epoxy is not affected by the water used in the process.

http://link.brightcove.com/services/player/bcpid1431564069?bclid=1432790108&bctid=1531204362

Gluing Gussets with T-88 Epoxy

 A review of the proper mixing of T-88 epoxy and clamping procedures.

http://link.brightcove.com/services/player/bcpid1431564069?bclid=1432790108&bctid=1485316095

Routing Plywood Ribs and Noseblocks

If you are scratch building your Fisher Flying Products aircraft, this is a good method for shaping parts that are used in multiples such as the nose ribs.

http://link.brightcove.com/services/player/bcpid1431564069?bclid=1432790108&bctid=1485308529

Building a Wood Wing Rib Jig

A useful review of how to build a wing rib construction jig.   You will need to build a number of these to speed up assembly of the wing ribs.   

http://link.brightcove.com/services/player/bcpid1431564069?bclid=1432790108&bctid=1432790101